Forum

Spread the love
tanyang
 
tanyang
tanyang
Group: Registered
Joined: 2020-06-29
New Member

About Me

Introduction:
This bodyboard jet ski for water sport is suitable for users who are addictive to exciting water sport. It is designed to meet various needs.
Features and Advantages:
1. All raw material and spare parts will be strictly tested for quality assurance to improve its durability and performance.
2. Its simple structure and operation is very friendly to those beginners or whom are not good swimmers. Switching to the standard mode, they can enjoy a safe water sport. For the skillful playres, the sports mode can give them the utmost excitement. There are four adjustable speeds, and the highest speed is up to 6500rpm. The users will be excited at the fast speed, and they can glide on any broad water.
3. The intelligent conrol systemc can secure the users. Its intelligent detection can help adviod potential danger. When the users are facing some dangerous situation, this electric bodyboard will start its automatic protection system. Its red light will flash to notice that it is running out of battery. In addition, the users would not be afraid of sinking because it has buoyancy.
Specifications
TypeElectric Bodyboard
Color White (Optional Color)
MaterialABS Plastics
Size90*48*27CM
PackingCarton
Packing Size93.5 * 28 *51.5 CM
Gross Weight15 KG
Net Weight10 KG
Carrying Weight<100KG
Water Surface SpeedHydrostatic Surface 5-15KM/H
Paddle SpecificationTrefoil full penetration diameter 18.5CM
Propeller1 pcs
Propeller VoltageDC36V
Propeller Speed6500 rpm
Propeller Power3200W
Propeller MaterialAluminum alloy die casting
Propeller Weight1.5KG
Propeller Size20*20*22CM
Propeller InstallationIndependent suspension
Battery Installation Quick insertion and removal of self-locking structure
Battery ConfigurationDC36V/12AH
AdapterDC43.8V/3A
Charging MethodContact type
Charging Time2-4H
Working Miles30-60 minutes (can increase battery capacity according to user needs to adjust the cruising range)
Waterproof LevelIP68
Our Service
1. Reply within 24 hours
2. Specialist online service
3. OEM accepted
4. Logo and advertisement design
5. Always choose best price transportation for you
6. You have our words, business and friendship forever
7. 100% product quality protection
8. 100% on-time shipment protection
9. 100% payment protectionBodyboard Jet Ski suppliers
website:http://www.e-bodyboard.com/jet-body-board/bodyboard-jet-ski/

Occupation

http://www.joint-pack.com/office-products/masking-tape/

Signature

Mini Brushless ESC based on VESC 4.12 with Aluminum Anodized Heat Sink
Product Parameter
Product nameMini Brushless ESC base on VESC
HardwareV4.20
FirmwareLatest Version
Instantaneous current50A continuous / 150A peak
Voltage8V-60V
Cells3-13S LiPo
Wiring Diagram
Package Detail
1* Brushless Motor Controller based on VSEC 4.12
1* Micro USB
1* VESC Controller Sensor Wire
1* VESC Manual
Difference Between Mini VESC 4.20 & Standard VESC 4.12
1> Hardware are based on VESC 4.12, however, We did many layout version optimization , finally upgrade from 4.12 to 4.20, 4.20 is so far our most satisfied layout version upon VESC 4.12.
2> There are main 5 components different, others are almost the same
A. Mosfet:
Mini VSEC 4.20 : Mosfet Model NO: NTMFS5C628NL
VESC 4.12: Mosfet Model NO: IRFS7530-7PPBF
Only in terms of mosfet, IRFS7530-7PPBF is far more expensive, it proves the more expensive one, the better performance from the data sheet of this two kinds of mosfet. Mini VESC 4.20 has no advantage ony by using a cheaper mosfets, so there are some remedial plan in design.
B. Capacitors:
Mini bldc motor controller based on VESC 4.20 use 3pcs shorter capacitors (220uf 100v) to well match our current hardware design, so no need to use the longer capacitors. This shorter capacitor are also used in VESC 6.6.
Motor speed controller based on VESC 4.12 use 3pcs longer capacitors (680uf, 63v)
These two capacitors are already verified in market, they're reliable.
C. Inductors
Mini electronic speed controller based on VESC 4.20 use molding power choke, It has great Anti-EMI performance.
DC motor driver based on VESC 4.12 use VESC 4.12 original SMD power inductors.
The molding power choke is far more expensive than the SMD power inductors due to different production process.
D. MLCC capacitors
Mini ESC controller based on VESC 4.20 use 1210 MLCC. Spec: 47uf,100V, which used in racing drone's ESC
ESC controller based on VESC 4.12 use 1206 MLCC (10uf, 50V) and 2220MLCC(15uf, 100V)
E. USB Port
Mini FSESC4.20 use micro USB port, while FSESC4.12 use mini USB port.
3> Size ComparationESC 50A
website:http://www.findermotor.com/electronic-speed-controller/esc-50a/

Social Networks
Member Activity
0
Forum Posts
0
Topics
0
Questions
0
Answers
0
Question Comments
0
Liked
0
Received Likes
0/10
Rating
0
Blog Posts
0
Blog Comments
Share: